PLUMBING AND PIPE EQUIPMENT

SEWER MACHINE 4" ELECTRIC

Where to find SEWER MACHINE 4  ELECTRIC in Houston

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: GENERAL PIPE

Model: EASY ROOTER

4 Hour: $48.00

Daily: $60.00

Weekly: $180.00

Quantity: for a period of  
4 hour(s)   day(s)   week(s)  


Additional Information

  • TYPICAL APPLICATIONS:
  • LARGE DRAINS, LONG RUNS, CLEAN OUTS, ROOTS
  • The Easy Rooter is a tough, easy-to-use machine. It has a rugged powder coated steel frame with roll bars to protect the motor and heavy-duty roller bearings in the cage for longer life and greater motor efficiency on long runs. The large zinc-plated cage holds 100 feet of 3/4" Flexicore cable.
  • An extra-long plated folding handle quickly locks in place, making it much easier to wheel the Easy Rooter to the job. (NEVER LOAD IN CAR TRUNK)
  • The Easy Rooter rolls smoothly on big 10" ball bearing wheels mounted on a half inch reinforced axle. Power is supplied by a 1/3 hp motor with capacitor start, thermal overload protection, and reverse switch. Standard safety features include an air-actuated foot pedal, ground fault circuit interrupter, and safety slip clutch.
  • Wire Rope Center Construction:
  • Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire rope and heat treated. Has unequalled strength and the right amount of flexibility. So tough it carries a one-year warranty against defect or breakage.
  • WEIGHT: 80 lbs. without cable.
  • LARGE CAGE: Zinc plated. 100 ft. of 3/4" capacity with heavy duty
  • roller bearings.
  • MOTOR: 1/3 hp heavy duty, capacitor start, thermal overload
  • protection, Forward/Off/Reverse Switch.
  • SAFETY SLIP CLUTCH: Protects cable and operator.
  • FOOT PEDAL: Leaves operator s hands free to control cable.
  • Uses air pressure, so there's no electrical contact between
  • pedal and motor.
  • POWER CORD: 20 ft. 3-wire vinyl covered with molded plug.
  • Equipped with ground fault circuit interrupter.
  • WHEELS: 10" semi-pneumatic with roller bearings.
  • CABLE: 3/4" for 4-6" lines
  • CUTTER HEADS:
  • Arrow Head-Starting tool, ideal for cutting and scraping.
  • 1 1/2" U-Cutter--Starting tool, to remove loose objects.
  • 2" U-Cutter--Finishing tool, for scraping inside edges of pipe.
  • Retrieving Tool--To remove loose objects
  • ***Note: There are no fixed rules about which cutter to use.***
  • ***If one tool doesn t take care of a stoppage, simply try another.***
  • RECOMMEND: Leather Gloves With double-reinforced palm, for hand protection when guiding cable.

* Prices are subject to change.

* Please call us with questions about our sewer machine 4 inch electric in Houston, Tomball, Porter, Cypress TX and neighboring communities in Southeast Texas.